SA514GrP high strength low alloy HSLA steel plate
GNEE provides SA514 Grade P low alloy steel material is high strength plate, the strength of the material is relatively high, SA514 Grade P high strength low alloy yield strength and tensile strength are far more than ordinary steel, SA514 Grade P high strength steel SA514 Grade P high strength steel plate is able to maintain stable performance under heavy load and high pressure working environment.
SA514 Grade P high toughness steel plate can be used in the demand for high tensile, high yield places, engineering car lifting gears, large excavators, marine channels and so on.
| C | P | S | V | B | ||||||||
| 0.12-0.21 | 0.45-0.70 | <=0.035 | <=0.04 | 0.20-0.35 | 1.20-1.50 | 0.85-1.20 | 0.44-0.60 | 0.03-0.08 | ~ | ~ | ~ | 0.001-0.005 |
| Elongation in 50mm | ||||||||||||
| less 3/4 inch | 690 | 760-895 | 18 | 235 | ||||||||
| over 3/4 to 2 1/2 | 690 | 760-895 | 18 | ~ | ||||||||
| over 2 1/2 to 6 inch | 620 | 690-895 | 16 | ~ | ||||||||
We have excellent after-sales service. If you have any questions about SA514GrP high strength low alloy hsla steel plate, you can contact us and we will reply you within two hours.
Populära Taggar: sa514grp high strength low alloy hsla steel plate, China sa514grp high strength low alloy hsla steel plate manufacturers, suppliers, factory, A633 Stålplatta med hög styrka, Stål med låg legering, stål med hög styrka, Stålplattor med låg legering, A710 låglegering stålplåt, stål med hög draglegering
